Linksys Smart WiFi Login | linksyssmartwifi is there to make your Linksys Router Login and set up an easy task! By simply entering or via IP address into the URL you will be able to access the Linksys webpage. Know how Http linksyssmartwifi com setup is also no big problem if you follow this guide

You will find solutions to all the common issues that you may experience with your Linksys Smart WiFi at your home.

How to Login Linksys router using

In a very few steps, we will tell you how you can log in to your Linksys router using www linksyssmartwifi com or Http 

Quick Tips – 

  • https://www is prefixed in the URL field, type in there.
  • Both the default username and password of Linksys is admin.

Follow the below steps for linksyssmartwifi login:

1: Connect your computer or laptop to the Linksys Router and open any web browser on your device.

2: In the URL or the address bar, type then press enter.

3: This address will prompt you to the linksyssmartwifi login page.

4: You need to type the Linksys default username and password in the blank text fields. 

5: Press Enter once has done. 

 6: It will prompt you to the BASIC home page upon the successful login.

Login Linksys router using
Linksys login instructions


NOTE: Some you won’t be able to access linksyssmartwifi login page using, in that case, try to access the login page using http://www.

Why does not work?

Several reasons can prevent you from accessing http linksyssmartwifi com and leave you to think linksyssmartwifi com not working. Get to know those reasons so that you can resolve it in less than a minute.

linksyssmartwifi com

Few common reasons are mentioned below:

  • Improper Physical Connection: Due to loose or improper connection between the Linksys Router and Modem, it may lead to Http linksyssmartwifi com not working. You need to ensure the ethernet cable is connected to the joining ports of the router and modem properly. Click here for Linksys wired connection.
  • Invalid IP: The invalid IP address can also cause such problems. Click here to know how to check the IP address.
  • User credentials: Sometimes incorrect username and password create such problems. It is advised to note down the passwords after you change them. Click here to reset the Linksys router password.
  • Defective Routers: Your router can be defective. If you have been using your router for a long time there is a higher chance of defect in old Linksys routers.
  • Outdated firmware: Outdated firmware might block all the connections hence you should update your firmware once in 3-4 months as it updates the router’s administration settings. Click here to know how to update Linksys Router Firmware?
  • Internet Connection: linksyssmartwifi com won’t connect in case of no internet connection between the routers and modem. If the physical connection is good between them then contact your Internet Service Provider (ISP).

Follow the below troubleshooting steps to fix “Http // login” issues:-


Steps to follow:-

  1. Take the ethernet cable that is included with the Linksys Router.
  2. Connect it to the yellow port of Modem. 
  3. Join it to the Linksys router’s internet port. 
  4. Turn ON your Linksys Router, Modem, and your wireless device. 
  5. Ensure the router’s LED lights are lit when you turn them ON and change color after you connect your devices.
  6. Choose your network name (SSID) from the available network list.
  7. Enter the username and password to connect to the Linksys network.

Note: Click here if you can’t find the username and password of Linksys wireless network.



Steps to follow:-

  1. Take the ethernet cable that is included with the Linksys Router.
  2. Connect it to the yellow port of Modem. 
  3. Join it to the Linksys router’s internet port. 
  4. Then take the second ethernet wire and connect it to the Router and join its other end to your computer/ device.
  5. Turn ON the Linksys Router, Modem, and your computer and log in to

More to do with

How to update the Linksys Router’s Admin Password?


We recommend changing your admin password soon after you take Linksys Router home and start using it. Hackers may intrude on your network just by knowing the brand and model number of your Linksys Router. Therefore you should change the password and make a note of it for future reference in case you forget it.

Here are some easy instructions for you to change the Linksys Router Admin Password via Http linksyssmartwifi com. Follow the below steps:

  1. On a device that is connected to the Linksys Router, open any browser in it. 
  2. In the address bar or URL, type https//
  3. You can also. use the default IP address i.e.
  4. Press Enter, it will prompt you to the Linksys router Login Authentication page.
  5. Here you need to enter the default username and password of the Linksys Router, i.e. username is blank and password is admin. 
  6. Upon successful Login, it will direct you to the Homepage of the linksyssmartwifi.
  7. Locate the Administration page there and go to the Management Section. 
  8. Here you need to enter the new username and password that you wish to keep for your Linksys Router.
  9. Re-enter the details to confirm the fields. Click Save
  10. The new settings are applied to the Linksys Router.
update the Linksys Router’s Admin Password

How to update the router firmware of Linksys router?

linksys firmware upgrade

Linksys router firmware update ensures that your Linksys Router stays compatible with the latest media devices introduced in the market. So that you don’t have to buy a new router after buying a new technology phone or laptop. To keep Linksys router secure you should constantly update router firmware Linksys.

There are two ways to update Linksys router firmware. You can update the router firm either manually or by an automatic method. 

Download the Linksys Router firmware from linksyssmartwifi official website:

  • First, you need to check whether a new Linksys Firmware is available or not.
  • Open the official website of and download the firmware as per the Linksys router model.

Step by step guide to follow:-

  • On a device that is connected to the Linksys Router’s network, open a web browser. 
  • In the URL please type or its IP address Press Enter.
  • It will prompt you to Linksys Login Webpage.
  • Log in by entering the Linksys router login default username and password. If you have changed or updated the credentials click here.
  • Upon successful Login, you will enter the BASIC Homepage.
  • Locate Administration, click on it. Then click Firmware upgrade.
  • Browse the downloaded file and select it.
  • Click on the “Start Upgrade” button.
  • Follow the on-screen instructions to complete the upgrade process.
  • Once the upgrade is completed, turn OFF the Linksys Router and then turn it ON again.


    Your Linksys Router Firmware update is successfully installed.